Translation

English
New Profile
6/110 · 11
English Chinese (Simplified)
SNMP Timeout SNMP 超时
The maximum number of milliseconds Cacti will wait for an SNMP response (does not work with php-snmp support). Cacti 将等待SNMP 响应的最大毫秒数 (不支持php-snmp).
Maximum OIDs Per Get Request 每个获取请求的最大 OIDs
The number of SNMP OIDs that can be obtained in a single SNMP Get request. 指定可在单次SNMP 请求中采集的OID 数量.
%d OID %d OID
%d OID's %d 个 OID
Bulk Walk Maximum Repetitions 批量步行最大重复次数
For SNMPv2 and SNMPv3 Devices, the SNMP Bulk Walk max-repetitions size. The default is to 'Auto Detect on Re-Index'. For very large switches, high performance servers, Jumbo Frame Networks or for high latency WAN connections, increasing this value may increase poller performance. More data is packed into a single SNMP packet which can reduce data query run time. However, some devices may completely refuse to respond to packets with a max-repetition size which is set too large. This can be especially true for lower-powered IoT type devices or smaller embedded IT appliances. Special attention to the overall network path MTU should also be considered since setting a value which is too high could lead to packet fragmentation. 对于 SNMPv2 和 SNMPv3 设备，SNMP Bulk Walk max-repetitions 大小。默认为“重新索引时自动检测”。对于超大型交换机、高性能服务器、巨型帧网络或高延迟 WAN 连接，增加此值可能会提高轮询器性能。更多的数据被打包到一个 SNMP 数据包中，这可以减少数据查询的运行时间。然而，一些设备可能会完全拒绝响应最大重复大小设置过大的数据包。对于功率较低的物联网类型设备或较小的嵌入式 IT 设备来说尤其如此。还应特别注意整个网络路径 MTU，因为设置过高的值可能会导致数据包碎片。
Auto Detect on Re-Index 重新索引时自动检测
Auto Detect/Set on first Re-Index 第一次重新索引时自动检测/设置
%d Repetition 网格选项
%d Repetitions %d重复
SNMP Retries SNMP 重试
The maximum number of attempts to reach a device via an SNMP readstring prior to giving up. 在放弃之前通过SNMP 读取字符串连接设备的最大次数.
A useful name for this Data Storage and Polling Profile. 这个数据存储和采集器配置文件的一个有用的名字.
New Profile 新建配置文件
Polling Interval 采集周期
The frequency that data will be collected from the Data Source? 数据将从数据源采集的频率?
How long can data be missing before RRDtool records unknown data. Increase this value if your Data Source is unstable and you wish to carry forward old data rather than show gaps in your graphs. This value is multiplied by the X-Files Factor to determine the actual amount of time. 在RRDtool 记录未知数据之前数据可能会丢失多久. 如果您的数据源不稳定并且您希望继承旧数据而不是显示图形中的空白,请增加此值. 该值乘以X-Files Factor以确定实际时间量.
X-Files Factor X Files 因子
The amount of unknown data that can still be regarded as known. 未知数据量仍然可以被视为已知.
Consolidation Functions 合并功能
How data is to be entered in RRAs. 如何在RRA 中输入数据.
Is this the default storage profile? 这是默认的存储配置文件吗?
RRDfile Size (in Bytes) RRD 文件大小(字节)
Based upon the number of Rows in all RRAs and the number of Consolidation Functions selected, the size of this entire in the RRDfile. 根据所有RRA 中的行数和所选合并函数的数量,在RRD 文件中显示整个大小.
New Profile RRA 新的配置文件RRA
Aggregation Level 聚合级别
The number of samples required prior to filling a row in the RRA specification. The first RRA should always have a value of 1. 在RRA规范中填充行之前所需的样本数量. 第一个RRA值应该是1.
How many generations data is kept in the RRA. RRA 中保存了多少代数据.
Default Timespan 默认时间跨度
Component Translation Difference to current string
This translation Propagated Translated Cacti/core
The following string has the same context and source.
Propagated Translated Cacti/core (v1.2.x)

Loading…

No matching activity found.

Browse all component changes

Glossary

English Chinese (Simplified)
No related strings found in the glossary.

String information

Source string location
include/global_form.php:220
String age
3 years ago
Source string age
3 years ago
Translation file
locales/po/zh-CN.po, string 2056