Translation

English
%d OID
7/100 · 6
English Chinese (Simplified)
SNMP v3 password for this device. 设备的SNMPv3 密码.
SNMP Privacy Protocol (v3) SNMP 私有协议 (v3)
Choose the SNMPv3 Privacy Protocol. 选择SNMPv3 的隐私协议.
SNMP Privacy Passphrase (v3) SNMP 私有密码 (v3)
Choose the SNMPv3 Privacy Passphrase. 选择SNMPv3 的私有密码.
SNMP Context (v3) SNMP 上下文(v3)
Enter the SNMP Context to use for this device. 请为设备输入SNMP 的相关信息.
SNMP Engine ID (v3) SNMP 引擎ID (v3)
Enter the SNMP v3 Engine Id to use for this device. Leave this field empty to use the SNMP Engine ID being defined per SNMPv3 Notification receiver. 请输入用于该设备的SNMPv3 引擎ID. 如果留空,则可以使用每个SNMPv3 通知接收器定义的SNMP 引擎ID.
SNMP Port SNMP 端口
Enter the UDP port number to use for SNMP (default is 161). 输入用于SNMP 的UDP 端口号 (默认为161).
SNMP Timeout SNMP 超时
The maximum number of milliseconds Cacti will wait for an SNMP response (does not work with php-snmp support). Cacti 将等待SNMP 响应的最大毫秒数 (不支持php-snmp).
Maximum OIDs Per Get Request 每个获取请求的最大 OIDs
The number of SNMP OIDs that can be obtained in a single SNMP Get request. 指定可在单次SNMP 请求中采集的OID 数量.
%d OID Max OID
%d OID's %d 个 OID
Bulk Walk Maximum Repetitions 批量步行最大重复次数
For SNMPv2 and SNMPv3 Devices, the SNMP Bulk Walk max-repetitions size. The default is to 'Auto Detect on Re-Index'. For very large switches, high performance servers, Jumbo Frame Networks or for high latency WAN connections, increasing this value may increase poller performance. More data is packed into a single SNMP packet which can reduce data query run time. However, some devices may completely refuse to respond to packets with a max-repetition size which is set too large. This can be especially true for lower-powered IoT type devices or smaller embedded IT appliances. Special attention to the overall network path MTU should also be considered since setting a value which is too high could lead to packet fragmentation. 对于 SNMPv2 和 SNMPv3 设备，SNMP Bulk Walk max-repetitions 大小。默认为“重新索引时自动检测”。对于超大型交换机、高性能服务器、巨型帧网络或高延迟 WAN 连接，增加此值可能会提高轮询器性能。更多的数据被打包到一个 SNMP 数据包中，这可以减少数据查询的运行时间。然而，一些设备可能会完全拒绝响应最大重复大小设置过大的数据包。对于功率较低的物联网类型设备或较小的嵌入式 IT 设备来说尤其如此。还应特别注意整个网络路径 MTU，因为设置过高的值可能会导致数据包碎片。
Auto Detect on Re-Index 重新索引时自动检测
Auto Detect/Set on first Re-Index 第一次重新索引时自动检测/设置
%d Repitition 日志保留个数
%d Repetitions 网格选项
SNMP Retries SNMP 重试
The maximum number of attempts to reach a device via an SNMP readstring prior to giving up. 在放弃之前通过SNMP 读取字符串连接设备的最大次数.
A useful name for this Data Storage and Polling Profile. 这个数据存储和采集器配置文件的一个有用的名字.
New Profile 新建配置文件
Polling Interval 采集周期
The frequency that data will be collected from the Data Source? 数据将从数据源采集的频率?
How long can data be missing before RRDtool records unknown data. Increase this value if your Data Source is unstable and you wish to carry forward old data rather than show gaps in your graphs. This value is multiplied by the X-Files Factor to determine the actual amount of time. 在RRDtool 记录未知数据之前数据可能会丢失多久. 如果您的数据源不稳定并且您希望继承旧数据而不是显示图形中的空白,请增加此值. 该值乘以X-Files Factor以确定实际时间量.
X-Files Factor X Files 因子
Component Translation Difference to current string
This translation Propagated Translated Cacti/core (v1.2.x)
The following string has the same context and source.
Propagated Needs editing Cacti/core

Loading…

No matching activity found.

Browse all component changes

Things to check

PHP format

Following format strings are missing: %d

Reset

Glossary

English Chinese (Simplified)
No related strings found in the glossary.

String information

Flags
php-format
Source string location
include/global_form.php:152
String age
2 years ago
Source string age
3 years ago
Translation file
locales/po/zh-CN.po, string 1759