Translation

English
English Greek
When using innodb_file_per_table, it is important to set the innodb_file_format to Barracuda. This setting will allow longer indexes important for certain Cacti tables. Όταν χρησιμοποιείτε το innodb_file_per_table, είναι σημαντικό να ρυθμίσετε το innodb_file_format στο Barracuda. Αυτή η ρύθμιση θα επιτρέψει μεγαλύτερα ευρετήρια σημαντικά για ορισμένους πίνακες Cacti.
If your tables have very large indexes, you must operate with the Barracuda innodb_file_format and the innodb_large_prefix equal to 1. Failure to do this may result in plugins that can not properly create tables. Εάν τα τραπέζια σας έχουν πολύ μεγάλα ευρετήρια, πρέπει να λειτουργήσετε με το Barracuda innodb_file_format και το innodb_large_prefix ίσο με 1. Εάν δεν το κάνετε αυτό μπορεί να οδηγήσει σε προσθήκες που δεν μπορούν να δημιουργήσουν σωστά πίνακες.
InnoDB will hold as much tables and indexes in system memory as is possible. Therefore, you should make the innodb_buffer_pool large enough to hold as much of the tables and index in memory. Checking the size of the /var/lib/mysql/cacti directory will help in determining this value. We are recommending 25%% of your systems total memory, but your requirements will vary depending on your systems size. Το InnoDB θα κρατήσει όσο το δυνατόν περισσότερους πίνακες και ευρετήρια στη μνήμη του συστήματος. Επομένως, θα πρέπει να κάνετε το innodb_buffer_pool αρκετά μεγάλο για να κρατήσετε όσο περισσότερους πίνακες και ευρετήριο στη μνήμη. Ο έλεγχος του μεγέθους του κατάλογο / var / lib / mysql / cacti θα βοηθήσει στον προσδιορισμό αυτής της τιμής. Συνιστούμε 25 %% από τα συστήματα σας για μνήμη, αλλά οι απαιτήσεις σας θα διαφέρουν ανάλογα με το μέγεθος των συστημάτων σας.
This settings should remain ON unless your Cacti instances is running on either ZFS or FusionI/O which both have internal journaling to accomodate abrupt system crashes. However, if you have very good power, and your systems rarely go down and you have backups, turning this setting to OFF can net you almost a 50% increase in database performance. Αυτές οι ρυθμίσεις θα πρέπει να παραμείνουν ΕΝΕΡΓΟ, εκτός εάν οι παρουσίες Cacti εκτελούνται είτε σε ZFS είτε σε FusionI / O, τα οποία έχουν και τα δύο εσωτερικά περιοδικά για να εξυπηρετήσουν απότομες διακοπές λειτουργίας του συστήματος. Ωστόσο, εάν έχετε πολύ καλή ισχύ και τα συστήματά σας σπάνια κατεβαίνουν και έχετε αντίγραφα ασφαλείας, η απενεργοποίηση αυτής της ρύθμισης μπορεί να σας οδηγήσει σε αύξηση σχεδόν 50% στην απόδοση της βάσης δεδομένων.
This is where metadata is stored. If you had a lot of tables, it would be useful to increase this. Αυτό είναι όπου αποθηκεύονται τα μεταδεδομένα. Αν είχατε πολλά τραπέζια, θα ήταν χρήσιμο να αυξήσετε αυτό το ποσό.
Rogue queries should not for the database to go offline to others. Kill these queries before they kill your system. Τα ερωτήματα Rogue δεν πρέπει να αποσυνδεθούν από τη βάση δεδομένων για άλλους. Σκοτώστε αυτά τα ερωτήματα πριν σκοτώσουν το σύστημά σας.
Maximum I/O performance happens when you use the O_DIRECT method to flush pages. Η μέγιστη απόδοση Ι / Ο συμβαίνει όταν χρησιμοποιείτε τη μέθοδο O_DIRECT για την εκκαθάριση σελίδων.
Setting this value to 2 means that you will flush all transactions every second rather than at commit. This allows %s to perform writing less often. Ο ορισμός αυτής της τιμής σε 2 σημαίνει ότι θα ξεπλύνετε όλες τις συναλλαγές κάθε δευτερόλεπτο και όχι κατά τη διαδικασία δέσμευσης. Αυτό επιτρέπει στο %s να εκτελεί γραφή λιγότερο συχνά.
With modern SSD type storage, having multiple io threads is advantageous for applications with high io characteristics. Με τη σύγχρονη αποθήκευση τύπου SSD, η κατοχή πολλαπλών συνδέσμων io είναι πλεονεκτική για εφαρμογές με υψηλά χαρακτηριστικά io.
As of %s %s, the you can control how often %s flushes transactions to disk. The default is 1 second, but in high I/O systems setting to a value greater than 1 can allow disk I/O to be more sequential Από το %s %s, μπορείτε να ελέγξετε πόσο συχνά το %s ξεχειλίζει τις συναλλαγές στο δίσκο. Η προεπιλογή είναι 1 δευτερόλεπτο, αλλά σε υψηλά συστήματα εισόδου / εξόδου ρύθμιση σε τιμή μεγαλύτερη από 1 μπορεί να επιτρέψει δίσκο I / O να είναι πιο διαδοχική
With modern SSD type storage, having multiple read io threads is advantageous for applications with high io characteristics. Depending on your MariaDB/MySQL versions, this value can go as high as 64. But try to keep the number less than your total SMT threads on the database server. Με τη σύγχρονη αποθήκευση τύπου SSD, η πολλαπλή ανάγνωση των νημάτων είναι πλεονεκτική για εφαρμογές με υψηλά χαρακτηριστικά io.
With modern SSD type storage, having multiple write io threads is advantageous for applications with high io characteristics. Depending on your MariaDB/MySQL versions, this value can go as high as 64. But try to keep the number less than your total SMT threads on the database server. Με τη σύγχρονη αποθήκευση τύπου SSD, η ύπαρξη πολλαπλών κειμένων εγγραφής είναι πλεονεκτική για εφαρμογές με υψηλά χαρακτηριστικά io.
%s will divide the innodb_buffer_pool into memory regions to improve performance for versions of MariaDB less than 10.5. The max value is 64, but should not exceed more than the number of CPU cores/threads. When your innodb_buffer_pool is less than 1GB, you should use the pool size divided by 128MB. Continue to use this equation up to the max the number of CPU cores or 64. Το %s θα διαιρέσει το innodb_buffer_pool σε περιοχές μνήμης για να βελτιώσει την απόδοση. Η μέγιστη τιμή είναι 64. Όταν το innodb_buffer_pool σας είναι μικρότερο από 1GB, θα πρέπει να χρησιμοποιήσετε το μέγεθος της πισίνας διαιρούμενο με 128MB. Συνεχίστε να χρησιμοποιείτε αυτήν την εξίσωση μέχρι το μέγιστο των 64.
%s will divide the innodb_buffer_pool into memory regions to improve performance for versions of MySQL upto and including MySQL 8.0. The max value is 64, but should not exceed more than the number of CPU cores/threads. When your innodb_buffer_pool is less than 1GB, you should use the pool size divided by 128MB. Continue to use this equation up to the max of the number of CPU cores or 64. Το %s θα διαιρέσει το innodb_buffer_pool σε περιοχές μνήμης για να βελτιώσει την απόδοση. Η μέγιστη τιμή είναι 64. Όταν το innodb_buffer_pool σας είναι μικρότερο από 1GB, θα πρέπει να χρησιμοποιήσετε το μέγεθος της πισίνας διαιρούμενο με 128MB. Συνεχίστε να χρησιμοποιείτε αυτήν την εξίσωση μέχρι το μέγιστο των 64.
If you have SSD disks, use this suggestion. If you have physical hard drives, use 200 * the number of active drives in the array. If using NVMe or PCIe Flash, much larger numbers as high as 100000 can be used. Εάν διαθέτετε δίσκους SSD, χρησιμοποιήστε αυτήν την πρόταση. Εάν έχετε φυσικούς σκληρούς δίσκους, χρησιμοποιήστε 200 * τον αριθμό ενεργών μονάδων δίσκου στον πίνακα. Εάν χρησιμοποιείτε NVMe ή PCIe Flash, μπορούν να χρησιμοποιηθούν πολύ μεγαλύτεροι αριθμοί έως και 100000.
If you have SSD disks, use this suggestion. If you have physical hard drives, use 2000 * the number of active drives in the array. If using NVMe or PCIe Flash, much larger numbers as high as 200000 can be used. Εάν διαθέτετε δίσκους SSD, χρησιμοποιήστε αυτήν την πρόταση. Εάν διαθέτετε φυσικούς σκληρούς δίσκους, χρησιμοποιήστε 2000 * τον αριθμό ενεργών μονάδων δίσκου στον πίνακα. Εάν χρησιμοποιείτε NVMe ή PCIe Flash, μπορούν να χρησιμοποιηθούν πολύ μεγαλύτεροι αριθμοί έως 200000.
If you have SSD disks, use this suggestion. Otherwise, do not set this setting. Εάν διαθέτετε δίσκους SSD, χρησιμοποιήστε αυτήν την πρόταση. Διαφορετικά, μην ορίσετε αυτήν τη ρύθμιση.
With modern SSD type storage, having multiple read io threads is advantageous for applications with high io characteristics. Με τη σύγχρονη αποθήκευση τύπου SSD, η πολλαπλή ανάγνωση των νημάτων είναι πλεονεκτική για εφαρμογές με υψηλά χαρακτηριστικά io.
With modern SSD type storage, having multiple write io threads is advantageous for applications with high io characteristics. Με τη σύγχρονη αποθήκευση τύπου SSD, η ύπαρξη πολλαπλών κειμένων εγγραφής είναι πλεονεκτική για εφαρμογές με υψηλά χαρακτηριστικά io.
When using MariaDB 10.2.4 and above, this setting should be off if atomic writes are enabled. Therefore, please enable atomic writes instead of the double write buffer as it will increase performance. Όταν χρησιμοποιείτε το MariaDB 10.2.4 και άνω, αυτή η ρύθμιση θα πρέπει να είναι απενεργοποιημένη εάν είναι ενεργοποιημένες οι ατομικές εγγραφές. Επομένως, ενεργοποιήστε τις ατομικές εγγραφές αντί για το buffer διπλής εγγραφής, καθώς θα αυξήσει την απόδοση.
When using MariaDB 10.2.4 and above, you can use atomic writes over the doublewrite buffer to increase performance. Όταν χρησιμοποιείτε το MariaDB 10.2.4 και άνω, μπορείτε να χρησιμοποιήσετε ατομικές εγγραφές στο buffer διπλής εγγραφής για να αυξήσετε την απόδοση.
%s Tuning %s Συντονισμός
Note: Many changes below require a database restart Σημείωση: Πολλές αλλαγές παρακάτω απαιτούν την επανεκκίνηση της βάσης δεδομένων
Variable Μεταβλητή
Current Value Τρέχουσα αξία
Recommended Value Συνιστώμενη τιμή
Comments Σχόλια
PHP %s is the minimum version Η PHP %s είναι η έκδοση mimimum
A minimum of %s memory limit Ένα ελάχιστο όριο μνήμης %s MB
A minimum of %s m execution time Ένα ελάχιστο% χρόνου εκτέλεσης
A valid timezone that matches MySQL and the system Μια έγκυρη ζώνη ώρας που ταιριάζει με τη MySQL και το σύστημα
Component Translation Difference to current string
This translation Propagated Needs editing Cacti/core (v1.2.x)
The following string has the same context and source.
Propagated Needs editing Cacti/core

Loading…

No matching activity found.

Browse all component changes

Glossary

English Greek
No related strings found in the glossary.

String information

Source string location
lib/utility.php:1167 lib/utility.php:1203
String age
2 years ago
Source string age
3 years ago
Translation file
locales/po/el-GR.po, string 3730